Grasp the top arm of your heavy-duty stapler and pull it up, away from the stapler base. Some types of heavy-duty staplers have a button toward the back of the base that will release this upper arm, while other models simply slide up. As the arm slides up, it exposes the refill tray.
How do you load a Swingline staple gun?
Load the Swingline staple gun by removing the spring loaded push bar located on the back of the stapler’s handle. Slide the staples into the stapler, and then replace the push bar, locking it in place. Press the stapler against the surface that is to be stapled.
What staples does a Stanley tr45 use?
This staple gun uses Stanley TRA200 or Arrow JT-21 light duty staples. Versatile, durable, and designed to accomplish tasks efficiently.
How do you load staples into a Swingline stapler?
However, the way to load staples into a Swingline heavy duty stapler differs from the method for loading most other manual staplers and can cause a little confusion. Remove the follow block at the back of the stapler by pushing the mechanism in, lifting the block up over the holding hooks and sliding it out from the stapler.
How do you load a heavy duty stapler?
Remove the follow block at the back of the stapler by pushing the mechanism in, lifting the block up over the holding hooks and sliding it out from the stapler. The follow block is the spring-loaded mechanism that holds the staples in place within the stapler. Load the heavy-duty staples into the staple tray.
How do you insert staples into a stapler?
Insert the staples onto the stapler slide. Top of staples should face up, as shown. Reinsert the slide mechanism back into the stapler slide. Push all the way until flush with the back of the stapler.
What’s the best way to close a stapler?
Lower the stapler head to close it. When you’re finished placing staples legs-down in the tray, grasp the base again. Push the top of the stapler back down onto the tray. It’ll click in place and your stapler will be ready for use again. Press the button on the stapler’s back end. Set the stapler down on the table and look at the back end.
