Safety Precautions
- Recommend two persons aloft and an observer on deck.
- Tie off all tools with line.
- Radiating equipment must be secured.
- Avoid working aloft underway if possible.
What PPE is used while working aloft?
Use the correct PPE (personal protection equipment) – 5 point harness, 2 ropes (working rope & safety rope), helmet, life jacket, fall arrester, non-slip shoes.
Should therefore always be taken to ensure personal safety when work has to be done aloft or when working outboard?
Proper precautions should therefore always be taken to ensure personal safety when work has to be done aloft or when working outboard. It must be remembered that the movement of a ship in a seaway and extreme weather conditions even when alongside, will add to the hazards involved in work of this type.
What are the essentials for the safe working practice of seafarers on board ships?
Personal protective equipment includes safety helmets, shoes, goggles, ear-muffs, safety harness, life-jackets, life rafts, etc., which is used to safeguard the individual seafarer from any harm.
What is the danger when working aloft?
Hazards Involved Falling from a height or in the water when working overside or on ships deck. Personal Injury whilst working on the Mast. Personal injury by falling objects.
What are the safety precautions in welding?
Welding Safety Precautions
- Welding helmets with side-shields. Welding helmets protect you from UV radiation, particles, debris, hot slag and chemical burns.
- Respirators. Respirators protect you from fumes and oxides that the welding process creates.
- Fire resistant clothing.
- Ear protection.
- Boots and gloves.
Who among the crew is not allowed to work aloft unless supervised the more experience one?
If you are a seafarer with limited experience, you should not work aloft or overside, unless supervised by a more experienced crewmember – but whatever your experience level, you should always have a responsible crewmember keeping watch on deck.
How do you maintain safe working practices onboard?
- 1 Leave the area – upwind.
- 2 Investigate the cause and assess the risk.
- 3 Tell the emergency services.
- 4 If you feel dizzy or smell fumes, GET OUT FAST.
- 5 Do NOT rush in if persons collapses.
- 6 Do NOT enter hold with leaker without permission.
- 7 Do NOT take risks.
What is work aloft?
Working aloft or Overside means a work being performed at a height and involving risk of falling, resulting in an injury.
What precautions must be taken before entering an enclosed space?
The confined space has to be well ventilated before entering. Enough time should be allowed to establish a ventilation system to ensure that air containing enough oxygen to sustain life is introduced. Ventilation can either be natural or mechanical using blowers.
Is Coswp mandatory?
Questions concerning COSWP make a regular appearance in both MCA oral and written examinations at all ranks. It is a statutory requirement that seafarers are provided with the information necessary to ensure their health and safety.
What is the danger when working on oily surfaces?
These spaces are often associated with many safety hazards such as asphyxiation, hazardous chemical exposure, and flammable vapors and gases that can cause many health risks. Before entering, staff should ensure they are taking appropriate protocol and assess the work environment properly before entering.
Control Measures to be taken while working Aloft or Overside
- Proper PPE shall be donned at all times.
- All equipment and ropes to be used for the job shall be thoroughly inspected.
- Adequate non-skid shoes to be worn.
- Ensure area is clear of any slipping hazard.
- Harness and lifeline to be used at all times.
What PPE is use for working aloft?
What are the 6 hazards of working aloft?
These are fatigue, training, time pressures, procedures, leadership, risk acceptance, workload and environmental conditions. Prioritise collective protection measures, such as guard rails, proper lighting, marking of trip hazards, over personal protection measures.
What is the minimum height for working aloft?
Work aloft (above 2 metres) should not be carried out in the vicinity of cargo working, unless it is essential. Care must always be taken to avoid risks to anyone working or moving below. Suitable warning notices should be displayed.
What is the importance of Code of Safe Working Practices Act?
The Code of Safe Working Practices (COSWP) Code details the regulatory framework for health and safety on board, safety management and statutory duties underlying the advice in the Code and the areas that should be covered when introducing a recruit to the safety procedures on board, aspiring to provide guidance on …
Who is in charge of crew familiarization training?
The Master shall give each new crew member familiarization training and instructions which must be understood to the crew member before commencement of duties onboard. The Master shall designate a qualified person in charge of training the new crew members. The content of the familiarization training is highlighted below.
How to protect the health of crew members?
To protect the health of crew and others, including co-workers, crew members should: Maintain recommended physical distance from others where possible, when working on the aircraft e.g., while seated on the jump seat (s) during take-off or landing, during ground transportation and while in public places. Wash their hands regularly.
What do crew members need to know before joining a container ship?
Container ship operation :Familiarization Training For Crew All crew members onboard containership need to take all basic training as per STCW requirements prior to joining vessel. The Master shall give each new crew member familiarization training and instructions which must be understood to the crew member before commencement of duties onboard.
When do you need to have cabin crew?
If there were no services of food or drink during a flight, there would still have to be a minimum presence of cabin crew for safety, which is a legal requirement.
