Check that the electrical equipment is in good condition
- Switch off and unplug the equipment before you start any checks.
- Check that the plug is correctly wired (but only if you are competent to do so).
- Ensure the fuse is correctly rated by checking the equipment rating plate or instruction book.
What should you check for before using portable electrical appliances?
In some cases, a simple user check and visual inspection is enough, eg checking for loose cables or signs of fire damage and, if possible, checking inside the plug for internal damage, bare wires and the correct fuse.
What would be checked during a risk assessment?
identify what could cause injury or illness in your business (hazards) decide how likely it is that someone could be harmed and how seriously (the risk) take action to eliminate the hazard, or if this isn’t possible, control the risk.
What is electrical risk assessment?
The intent of this procedure is to perform a risk assessment, which includes a review of the electrical hazards, the associated foreseeable tasks, and the protective measures that are required in order to maintain a tolerable level of risk.
Which of the following is a common type of electrical hazards?
Some hazards include: Loose or improper connections, such as electrical outlets or switches. Frayed appliance or extension cords. Pinched or pierced wire insulation, which could occur from, for example, a chair leg sitting on an extension cord.
What are the two main types of electrical safety risk assessments?
While the organization may be busy initiating a risk assessment program, there are two common hazards that have already been identified through consensus standards: arc flash and shock hazards. These are risk assessed through an arc flash engineering study that will include a shock assessment.
How many steps is an electrical risk assessment?
five steps
The five steps to risk assessment.
Which of the following is an example of chemical hazard?
Some commonly used workplace chemical hazards include: Caustic substances. Cleaning products such as toilet cleaners, disinfectants, mildew remover and chlorine bleach. Glues. Heavy metals, including mercury, lead, cadmium, and aluminum.
