hazardous energy control program
Lockout/tagout is a hazardous energy control program used to ensure that machines and equipment are totally isolated from all energy sources (electrical, hydraulic, pneumatic, kinetic, potential, thermal, chemical, and radiation). Locks are used to secure switches and valves in the OFF or SAFE position.
What is the OSHA standard for control of hazardous energy known as on the service facility shop floor?
1910.147 – The control of hazardous energy (lockout/tagout). Occupational Safety and Health Administration.
What is a hazardous energy control program?
Hazardous energy control is more than Lockout. It encompasses Machine Guarding, Alternative Measures (alternative guarding arrangement that prevents exposure to hazardous energy), Lockout, and other methods of ensuring worker safety from contact with hazardous energy.
Who is responsible for lockout tagout?
manager
A manager is responsible for creating the lockout tagout program and documenting all specific energy control procedures. This involves identifying the employees, machines, equipment and processes that need to be included.
What are the 6 steps of lock out/tag out?
A lockout/tagout procedure should include the following six steps:
- Preparation.
- Shutdown.
- Isolation.
- Lockout/tagout.
- Stored energy check.
- Isolation verification.
What is the most common from of hazardous energy control?
Electrical energy
Electrical energy is the most common form of energy used in workplaces. It can be available live through power lines or it can also be stored, for example, in batteries or capacitors.
What is the correct order for proper lockout procedures?
Prepare a written sequence in checklist form for equipment access, lockout/tagout, clearance, release and start-up, where lockout is complex. Your workers should check with a supervisor or other knowledgeable person if in doubt about which energy sources may need to be controlled.
What is the final step in a lock out?
An effective lockout/tagout program should include the following eight steps.
- Step 1: Detailed procedures for equipment.
- Step 2: Notify affected employees.
- Step 3: Shut down equipment properly.
- Step 4: Disconnect all primary energy sources.
- Step 5: Address all secondary sources.
- Step 6: Verify the lockout.
What is an energy control procedure?
In 1910.147(c)(1), the regulation explains that “the employer shall establish a [energy control] program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing.
What is the first step in an energy control procedure?
- Prepare for shutdown.
- Shut down the machine(s) or equipment.
- Disconnect the energy isolating device(s).
- Apply the lockout or tagout device(s).
- Render all stored and/or residual energy safe.
- Verify the isolation and deenergization of the machine or equipment prior to starting work.
The Hazardous Energy Control – Lockout/Tagout Program is designed to prevent injuries resulting from unexpected start-up, energization or release of stored energy during servicing and maintenance of equipment. Ensure equipment can accept OSHA-approved LOTO devices and that these devices are readily available.
How is the control of Hazardous Energy ( Lockout / Tagout ) regulated?
The control of hazardous energy is regulated under OSHA’s control of hazardous energy (Lockout/Tagout) standard. The standard’s purpose is to protect workers from the dangers of hazardous energy.
Why is OSHA considering changes to Lockout / Tagout?
OSHA may also consider changes to the Lockout/Tagout standard that address hazardous energy control for new robotics technologies. Employers are increasingly using robots and robotic components in their workplaces.
What does OSHA mean by control of hazardous energy?
Control of Hazardous Energy – Lockout/Tagout. OSHA Publication 3120, (Revised 2002). This booklet presents OSHA’s general requirements for controlling hazardous energy during service or maintenance of machines or equipment. It is not intended to replace or to supplement OSHA standards regarding the control of hazardous energy.
When does the lockout and tagout standard not apply?
If an energy isolating device is capable of being locked out, the employer’s energy control program must utilize lockout, Unless the employer can demonstrate that the utilization of a tagout system will provide full employee protection as set forth by OSHA regulations. Which of the following does the lockout and tagout standard not apply to?
